Rev-Sim webinars are designed to explore the wide range of topics related to the Democratization of Simulation. Presented in cooperation with a number of the industry’s leading authorities, these educational webinars are developed to explore the enabling technologies, challenges, rewards, and present-day examples for implementation.
The MBD team at Toyota Motor Europe R&D is responsible for technical development of simulation methods and their deployment. This webinar defines the overall vision of the engineering data management solution, its extension to SPDM and results that have been measured.
This webinar highlights the benefits of using artificial intelligence in the design of vehicle crash structures as well as occupant kinematics in future autonomous vehicles.
This webinar shows how PAX could automate pre-processing and report generation with a similar effort as usually needed for setting up a single simulation in traditional simulation environments. As result, PAX can execute as many simulations as fast as the capacity of their servers allows.
This webinar showcases how Maya HTT clients are successfully utilizing data and enabling non-data scientists to leverage AI technologies. Those looking to understand what industrial IoT and AI can bring to an engineering organization are encouraged to view this webinar.
Hear how Caterpillar is leveraging simulation to allow their designers and engineers to do just that – a Heavy Industrials Case Study is presented by Sam Showman of Caterpillar.
This webinar discusses the advantages of applying a low code application development platform that effectively makes Excel spreadsheets behave like modern enterprise applications (that can be integrated into workflows if needed), eliminating Excel’s weaknesses and providing a far higher level of comfort that these tools are functioning correctly, consistently and securely.
This webinar will discuss the advantages of using automated validation to generate a descriptive system model with synchronized structure and behavior and illustrate ways in which this information can be transformed to support modeling and simulation. The use of models for failure analysis, sprint planning, and classification/data rights management will also be discussed.
A new HBM Articulation tool for positioning HBMs directly inside ANSA v21.1.0 is now available. Moreover, a new HBM Marionette tool as an alternative solution for positioning HBMs with the aid of LS-DYNA is also provided.
This webinar recording brings together all of the emerging simulation technologies in systems thinking and MBE to look at how they will contribute to advancing engineering simulation techniques in support of Industry 4.0 and 5.0. Advanced simulation technologies and data analytics will be exploited in conjunction with cognitive computing and Cyber-Physical Systems (CPS) comprised of interacting digital, analog, physical, and human components such as autonomous vehicles and collaborative robots.
nTopology shows you how to create reusable and automated design workflows to augment your Multidisciplinary Design Optimization processes in modeFRONTIER. He uses topology optimization as an example and shares tips on how to prepare your nTop workflows for automation.
Maiki Vlahinos, Senior Application Engineer at nTopology, shows you how to export both solid and fluid domains of a heat exchanger and prepare them for simulation in ANSYS Fluent.
This webinar recording includes a case study in which the goal was the development of a mathematical model for supporting condition-based maintenance (CBM) decisions. The model was designed for estimating the remaining fatigue service life of high-value mechanical components, given their service history and that specific flaws (such as corrosion defects) have been discovered in them, thus enabling CBM to move damaged component removals from unscheduled to scheduled maintenance action.
CAE fatigue methods for design optimization and virtual product validation
Simulation-based digital twins can ensure your facility maximizes performance and reclaims unused capacity without risk or downtime. Learn to use 6SigmaDCX to study the impact of new cooling technologies and optimize your data center facilities.
Understand your product’s performance earlier while you’re designing it.
Learn how 6SigmaDCX Release 15 ensures that the right data gets to the right people within an enterprise organization.
Discover how to quickly analyze and optimize the real-world behavior of mechatronic designs and to guarantee that they perform as expected, before committing to expensive physical prototype testing.
Simcenter 3D provides the capability to simplify the Simcenter interface for ease of workflow, which can provide efficient use of Simcenter.
Future Facilities’ capacity planning software 6SigmaAccess improves asset management and utilization tracking. Get a high-level look at power, space, cooling and resource availability to make better IT decisions.
The stakes are high in data center operation. The industry is experiencing significant downtime and efficiency issues that can be addressed through simulation.
Presented in march, 2021, this presentation discusses how manufacturing companies successfully deploy next generation technologies to turbocharge the impact of simulation.
In collaboration with MSC Software, CADLM is exposing what ML and AI means in the context of virtual manufacturing and CAE and how ML techniques can shorten the simulation cost dramatically across all industries. In particular discover how automotive OEMs such as PSA and Toyota implemented machine learning techniques to accelerate crash simulations which allow for real-time structure design optimization.
Learn how nTopology’s design software accelerates and simplifies the challenge of reaching the optimal design. Viewers will also see how VELO3D’s advanced metal additive manufacturing solution eliminates the compromises imposed by traditional manufacturing. Finally, you will learn how next-generation tools combine to produce a lightweight part with conformal channels that improves system efficiency and extends part life.
The more that systems thinking becomes an integral part of how design processes are performed, the more our engineers will examine critically the interaction of the various subsystems and components inherent to an overall system, rather than in an isolated manner. This webinar will look at how model-based design and model-based development can work alongside generative design, powered by pervasive simulation for the entire product team. Is this the next major step that is needed in our industry to design, validate and support our products with advanced integrated systems that have been increasing exponentially in complexity?
Recent advances in data science techniques in support of data driven models, especially in the application of AI, machine learning (deep learning) and predictive analytics, have brought these concepts to the fore in every area of industry. This webinar will discuss where we are, including some successful case studies, and how these technologies are being used to advance significantly the engineering analysis and simulation capabilities and approaches over the next 10 years.
An industrial case study from Polytec, a provider of advanced 3D laser interferometry measurements capture and visualization of ultrasonic inspections, will be presented to show how cloud-based FEA provided the needed accuracy to simulate travelling wave measurement across a thin plate and crack detection.
By using ModelCenter from Phoenix Integration as an integration platform, Pointwise to generate the meshes, and AcuSolve to run the CFD calculations, push-button design optimization was achieved.
Learn multi-block hybrid meshing techniques to improve mesh quality and concentrate mesh density in areas of interest.
In this webinar Chris Sideroff, Ph.D., managing director of Applied CCM Canada, uses Pointwise and the Caelus Python Library to understand the influence exerted by the turbulence model on computational fluid dynamics (CFD) simulation results for the FDA Blood Pump benchmark geometry.
How new engineering simulation technology is helping breathe new life into a 47 year old hydro station.
Systems thinking, model-based concepts and simulation methods and processes are closely connected. The support of pervasive engineering analysis & simulation technologies are vital in making these concepts feasible. This NAFEMS and Rev-Sim co-hosted webinar will examine how these concepts interact and how the resulting benefits are critical to the enterprise.
For simulation to have a broader financial impact on an enterprise, SPDM needs to be implemented and deployed seamlessly within the broader enterprise, especially as required to support implementations of Digital Threads and Digital Twins. This NAFEMS and Rev-Sim co-hosted webinar explores how these platform concepts advance the use and impact of analysis and simulation in the coming decade.
This webinar will provide an overview of how Akselos uses a system-level approach to incorporate data streams from inspection, sensors, and robotics into a high-fidelity, structural digital twin model to perform near real-time engineering simulation on large complex assets.
Co-hosted with Shell, this webinar shows how Akselos’ technology can extend the life of any large scale asset through it’s real-time monitoring and physics-based models. Akselos is capable of producing high-fidelity, physics-based models of large complex assets which may be connected to sensor data to regularly update the simulation model and provide the required assessments in a timely manner.
This NAFEMS and Rev-Sim co-hosted webinar will help to establish a fundamental understanding of Systems Thinking as a critical complement to the Reductionist design approach. As part of the discussion, we will explore the need for pervasive simulation across the entire product lifecycle as a critical tool for the design, manufacture and maintenance of tomorrow’s interconnected multidisciplinary products.
Fast and Cost-Effective Compressor Map Generation using Cloud-Based CFD
TotalSim US: Truck Add-On Predictor
Virtual Testing of Severe Service Control Valve with Autodesk CFD in the AWS Cloud
Afton Chemical Corporation: Fluid Performance
Coupling in-house Finite Element code with Ansys Fluent
HPC Case Study Valve Design: Clippard Instrument Laboratory had a proportional valve that was not delivering consistent performance. See how Democratizing HPC was able to help.
View webinar here.
Learn why it is essential that Sim Apps implement Numerical Simulation technologies which enable the practice of Sim Gov in order for the vision of democratization of simulations to be realized, as well as why it is important for engineering managers to get on the Sim Gov train sooner rather than later.
HPC Case Study: North Sea Asset Life Extension – Assessing Impacts on Helicopter Operations.
Case Study: Transmissions
Leveraging HPC tools to perform advanced engineering analysis quickly and cost-effectively.
Case Study: Gas Liquid Two-Phase Flow Application
Evaluation of gas rate due to liquid flow in energy plant liquid storage facility
Case Study: Racing Rules
Developing efficient processes to gain critical information to test aerodynamics and analyze racing behavior on various tracks keeps NASCAR ahead of the curve.
Case Study: CFD Analysis of V6 Intake Manifold
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: Pallet Design
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study – Dielectric Heating of an Insulated Block
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study – Data Classification
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: CFD Radial Fan Simulation
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: Welding Simulation Virtual Fabrication Technology (VFT)
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: CFD Modeling of ABB Transformers
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: Aircraft Design
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: Air Bag Simulation with ANSYS LS-DYNA
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: Greenlight Optics
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: ANSYS for Bioreactors
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Series Introduction
An introduction to Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Case Study: BWAY Buckets
Rev-Sim virtual coffee break webinar series featuring case studies focused on democratizing high performance computing (HPC).
Engineering simulation should be safely accessible to everyone – not just the experts. Democratized Simulation makes analysis more powerful and capable for CAE experts while accessible, safe and reliable for non-experts.